Analysis
Zapier Too Expensive? The Same 10,000 Runs: $289 vs €50 (2026)
Zapier bills you for every successful step. n8n bills you for the whole run. Take one five-step workflow, run it 10,000 times a month, and those two sentences turn into $289 versus 50 euros.
Watch the video version above, or read the full breakdown below. Every number links to the page it came from.
The Rule Nobody Reads
Zapier’s own help page says: “A task is any successful action that runs in Zapier. Only successful actions count toward your task usage.”
That’s actually fairer than it sounds. Triggers never use tasks. Filters and paths don’t. Steps that error out don’t. Formatter, delay and looping steps are free.
But look at what is left. Every action that works — send the email, update the row, post the message — is one task. Their own example is a Zap that uploads a file to Dropbox and sends a message in Slack — that automates two tasks. Run it ten times and it uses 20 tasks.
n8n counts differently. Its pricing page defines an execution as a single run of your entire workflow — it doesn’t matter how many steps are in it, or how much data it processes.
That one difference is the whole video. One meter counts steps. The other counts runs.
The Test Workflow (a model, not a measurement)
Here’s the workflow we’re pricing. One trigger, five actions — say, a new lead comes in, you enrich it, score it, add it to the sheet, notify sales, and send a reply. Every step succeeds.
On Zapier, the trigger is free and the five actions are five tasks. Five tasks per run. On n8n, it’s one execution per run.
This is a model. Real workflows have filters and failures, which change the count. We’re using the cleanest case so the rule is visible.
2,000 runs a month is 10,000 tasks. 10,000 runs is 50,000 tasks. 20,000 runs is a hundred thousand.
What Each Meter Charges
Zapier’s Professional plan, billed yearly, as shown on the pricing page on October first: 2,000 tasks, $49. 5,000, $89. 10,000, $129. 20,000, $189. 50,000, $289. A hundred thousand, $489.
Now the same runs on n8n Cloud, billed annually. 2,000 runs fits inside the Starter plan: 2,500 executions for 20 euros. 10,000 runs fits inside Pro: 10,000 executions for 50 euros.
So at 2,000 runs: $129 against 20 euros. At 10,000 runs: $289 against 50 euros. We’re not converting currencies — the pricing pages list dollars and euros, and a guessed exchange rate would be a number we can’t source.
And notice something fair about Zapier. The more you buy, the cheaper each task gets: about a cent and a quarter per task at 10,000, under six tenths of a cent at 50,000, under half a cent at a hundred thousand. It’s a ladder, not a cliff. The reason the bill climbs is that your step count multiplies your task count before you ever reach the ladder.
Sources: [8] zapier.com · [9] zapier.com · [10] zapier.com · [11] zapier.com · [12] zapier.com · [13] zapier.com · [14] n8n.io · [15] n8n.io
The $0 Option, and Its Catch
n8n also publishes a self-hosted Community Edition. The pricing page lists it on GitHub, separate from the paid plans. The license text grants a royalty-free license for your own internal business purposes — with limits, including on handing the software to others.
So the license is free, and you pay for a server instead. DigitalOcean’s published price for a two-gigabyte, one-CPU droplet is $12 a month. Four gigabytes, two CPUs, $24.
Here’s the flag we promised. We did not benchmark whether that server handles 10,000 runs a month. It depends on what your workflows do. So treat 12 dollars as the starting line, not a verdict.
If it does hold up, $12 across 10,000 runs is about a tenth of a cent per run, against about three cents on Zapier at that volume. If it doesn’t, the number moves.
Sources: [16] n8n.io · [17] raw.githubusercontent.com · [18] digitalocean.com · [19] digitalocean.com
When Zapier Is Still the Right Call
None of this makes Zapier the wrong tool. It makes it a tool you should price before you scale.
Zapier fits when your volume is small and steady, when nobody on your team wants to run a server, and when a failed step costing nothing matters to you — remember, errored steps don’t use tasks.
Self-hosting fits when you run many steps per workflow, when your volume is high, and when someone can own updates and backups. That someone’s time is a cost this article didn’t price — and it’s real. That’s our opinion, not a measurement.
And the free tier is where this starts. Zapier’s free plan is 100 tasks a month, with two-step Zaps only. Multi-step Zaps are a Professional feature, which starts at $19.99 a month. The third step is where the meter starts to matter.
Sources: [3] help.zapier.com · [6] zapier.com · [7] zapier.com
Check Your Own Number
Here’s how to do this for yourself in two minutes. Count the successful action steps in your busiest workflow. Multiply by how often it runs in a month. That’s your task count. Find it on Zapier’s ladder.
Then count the same workflow as runs, and look at n8n’s plans — or the server price if you’d self-host. Prices change; the pricing pages are linked below, and the date we pulled them is below.
That’s the verdict. Not “Zapier is bad.” Count your steps before you scale — because that’s the number the bill is built from.
Sources and Evidence
Each line below is quoted or paraphrased from the vendor’s or author’s own page, retrieved on the date shown.
- Zapier: A task is any successful action that runs in Zapier. Only successful actions count toward your task usage. — help.zapier.com (published 2026-08-21 · retrieved 2026-10-01)
- Zapier: Zap triggers never use tasks. — help.zapier.com (published 2026-08-21 · retrieved 2026-10-01)
- Zapier: In Zap workflows, the following do not count as tasks: All trigger steps. Any Filter or Paths step. All action steps that error or halt. All steps that do not run, either because of a previous filter or path condition, or because the Zap errored. In a sub-Zap, the Start a Sub-Zap trigger. Steps for Zapier Tables and Zapier Forms. Steps for the following Zapier apps: Formatter Delay Looping Sub-Zap app Digest Zapier Manager Storage — help.zapier.com (published 2026-08-21 · retrieved 2026-10-01)
- Zapier example: Uploading the file to Dropbox and sending a message in Slack automates two tasks. If your Zap runs ten times, it will use 20 tasks. — help.zapier.com (published 2026-08-21 · retrieved 2026-10-01)
- n8n: An execution is a single run of your entire workflow. It doesn’t matter how many steps are in the workflow or how much data it processes. — n8n.io (retrieved 2026-10-01)
- Zapier Free plan: 100 tasks per month, two-step Zaps. — zapier.com (retrieved 2026-10-01)
- Zapier multi-step Zaps are listed under the Professional plan, which starts from $19.99 per month. — zapier.com (retrieved 2026-10-01)
- Zapier Professional plan, 2,000 tasks/month, pay yearly: $49 per month. — zapier.com (retrieved 2026-10-01)
- Zapier Professional plan, 5,000 tasks/month, pay yearly: $89 per month. — zapier.com (retrieved 2026-10-01)
- Zapier Professional plan, 10,000 tasks/month, pay yearly: $129 per month. — zapier.com (retrieved 2026-10-01)
- Zapier Professional plan, 20,000 tasks/month, pay yearly: $189 per month. — zapier.com (retrieved 2026-10-01)
- Zapier Professional plan, 50,000 tasks/month, pay yearly: $289 per month. — zapier.com (retrieved 2026-10-01)
- Zapier Professional plan, 100,000 tasks/month, pay yearly: $489 per month. — zapier.com (retrieved 2026-10-01)
- n8n Cloud Starter: 20 EUR per month billed annually, 2.5K workflow executions with unlimited steps. — n8n.io (retrieved 2026-10-01)
- n8n Cloud Pro: 50 EUR per month billed annually, 10K workflow executions with unlimited steps. — n8n.io (retrieved 2026-10-01)
- Our reading (from [17]): n8n: a standard, self-hosted Community Edition is available on GitHub (n8n pricing page lists it separately from the paid plans). — n8n.io (retrieved 2026-10-01)
- n8n LICENSE.md (Sustainable Use License): non-exclusive, royalty-free license; use or modify only for your own internal business purposes or non-commercial/personal use; distribution to others only free of charge for non-commercial purposes. — raw.githubusercontent.com (retrieved 2026-10-01)
- DigitalOcean Basic Droplet (regular): 2 GiB RAM / 1 vCPU = $12.00 per month. — digitalocean.com (retrieved 2026-10-01)
- DigitalOcean Basic Droplet (regular): 4 GiB RAM / 2 vCPUs = $24.00 per month. — digitalocean.com (retrieved 2026-10-01)